Ghost Immobiliser Fitting
Protect your vehicle against key theft, cloning, and hacking by using the first aftermarket CAN-Immobiliser. With the added option of connecting to a Ghost app and GPS tracking system that can send you alerts to call when your car is altered with or stolen.
Installing an Ghost immobiliser is fairly simple for the qualified technician. Making use of the correct tools, insulation tape, and heat shrink tubing are essential.
Getting Started
Contrary to physical theft protection devices like wheel locks and car alarms, ghost immobilisers safeguard your vehicle without the need for key fobs or LED indicators. They are connected directly to the ECU CAN data network and are activated only after entering a PIN. This gives a greater level of security against key hacking, ECU swapping and cloning.
Installing a ghost immobiliser Birmingham requires a certain amount of agility and accuracy. It's like tiptoeing through an icy minefield. One mistake could cause severe damage to the circuits of your vehicle's electrical system. It is important to understand the installation procedure and prepare your vehicle in a timely manner.
You'll need to take out interior panels from the vehicle to make space for the immobiliser. Once you've found the perfect location to conceal it then use cable tie to secure it. Then, clean up the wiring by tying down loose wires and using insulation tape or heat shrink tubing to cover exposed connections. see more will reduce the risk of a short circuit that is not intended to happen and improve the appearance and reducing the risk of theft.
Find the source of constant 12V power and a grounding point for the ghost immobiliser. Once you've identified these connections, test the power cables using a multimeter to ensure they're delivering a consistent voltage. Connect the CAN H and L wires from the immobiliser to your chosen power source and grounding point.
Once you've made all of the necessary connections It is important to check them and inspect the immobiliser for signs of corrosion or damage. By entering a PIN and then starting the car is a great method of testing the system. This should be part of your routine since it allows you to detect any intermittent problems early. Regular testing can help to improve the longevity of the device and keep it running at its peak performance.
Preparing the Vehicle
The installation of an Ghost immobiliser is a complex task that requires the right tools and expertise. A wiring diagram of the vehicle is vital for locating the correct wires and making precise connections. A multimeter is a great tool to check the electrical value and ensure security. Cable tie and insulation tape can be used to secure the connections and protect them from alteration. Finally, a user guide will provide specific directions specifically tailored to your Ghost Immobiliser model.
Once installed the ghost immobiliser will stop unauthorised engine starts by requiring the owner to enter a unique PIN sequence using buttons on the steering wheel or centre console. This can be accomplished manually or remotely using the mobile phone app and the code is able to be altered by the owner of the vehicle at any time. The device is also silent and is undetectable by thieves since it doesn't emit any radio frequencies.
A ghost immobiliser connects directly to the vehicle's CAN bus, which is a network that communicates with all the electronic control units (ECUs). It intercepts the signals sent by ECUs, and blocks the engine if a false signal is identified. The system is weatherproof and tamper proof. It doesn't have any LED indicators or keys to attract thieves' attention.
It can be positioned behind or in a less noticeable location so that it's not visible to thieves, and does not interfere with vehicle's performance. It could even be placed in a small box and makes it less likely to be found during a test drive by unscrupulous salespeople for cars.
Its stealthy operation and integration with the vehicle's CAN bus network make it an effective deterrent against modern methods of theft, including key cloning and signal relay attacks. Combining the system with other security measures will create a powerful barrier to frustrate even the most persistent thieves. More and more insurance companies suggest or require ghost immobilisers as they can reduce monthly premiums.
Making Connections
Unlike traditional security systems that can be heard by thieves, ghost immobilisers work silently to stop them from knowing that your vehicle has been switched on. They also stop high-tech methods used to steal vehicles like OBD port hacking. Installing them without leaving permanent marks on your car is a great option for those who plan to sell the car in the near future.
The Autowatch Ghost 2 is a immobiliser for CANbus that is one of the most reliable and advanced solutions to stop car theft. It makes use of the CAN data network to deactivate your engine and generates a PIN code that only you know, which means it is difficult for thieves to detect. It can be used on various vehicles, and it works with all the features that are already in place including car alarms and steering wheel locks. GPS trackers, and door lock bypass.
If you opt to use an Ghost immobiliser for your vehicle, be sure you refer to the wiring diagram to determine the wires to connect. Double-check the locations of these wires to ensure that they are in the correct location, and mark them with tape or labels to aid in keeping on track of them. You'll also need to locate a source of continuous power (12V) and a grounding point for the system. Once these are in place, you are able to begin to connect the components to complete the installation.
If the ghost immobiliser is connected to your CAN bus it will stop your vehicle from starting unless you enter a pin number using the buttons on the dashboard or the steering wheel. This will stop ECU hacking, key cloning, and other methods of theft from vehicles. It can also be combined with other Thatcham approved security devices like alarms or tyre clips to provide your vehicle with an even higher level of protection.
As the UK automotive industry grows, so do the options available for securing your vehicle. There are many ways for thieves to gain access into your vehicle and steal it, which is why it's crucial to do all you can to stop it from being taken away. Ghost immobilisers have become an increasingly popular option for car owners who are accountable.
Testing the System
The Ghost Immobiliser communicates with the vehicle's ECU via a CAN network. This stops the engine from being started until a PIN code has been entered. This makes it extremely difficult for thieves to steal your key fob and then start your car, and more difficult to disable the system by hacking into its electronic components.
Ghost Immobilisers can also be used in conjunction with GPS tracking devices to help locate your vehicle if it's stolen. This is a feature that isn't typically found in security products that are sold aftermarket, but it is a great option to increase your vehicle's security, and give you peace of mind.
The Ghost-II immobiliser offers not only an enhanced security, but also provides a more convenient experience for the user by getting rid of the need for additional key fobs or devices. It features a simple, intuitive PIN code entry system that works seamlessly with your daily routine. In addition, it offers modes of deactivation and other features that allow you to temporarily disable the immobiliser to allow valet parking or servicing.
Before you begin the installation process, be familiar with your vehicle's wiring and prepare the necessary tools. A basic set of hand tools will allow you the flexibility to make precise connections, while a multimeter can help check electrical values. Insulation tape and heat-shrink tubing are essential to shield connections from short circuits. Cable ties can also be used to secure wiring. It is also essential to work in an area which is well-lit and wear safety equipment when working with electrical tools and components.
You should test the Ghost immobiliser after having completed the installation to make sure it is working properly. It is recommended to first start the vehicle without entering the PIN. If this doesn't work, you will need to retest and inspect the connections more thoroughly.
Unlike other security systems that are available, unlike other security systems, the Ghost Immobiliser is a covert device that cannot be detected by thieves and is more effective than traditional deterrents, such as wheel clamps or steering locks. It is TASSA-approved and recognized by a few insurance companies. This is a cost-effective investment that will give you the peace of heart you deserve.